Skip to content
Hillcrest Lock & Key SpecialistsRequest a visit
Open 24/7(226) 641-0178Call now
Hands lining up a steel deadbolt with the round bore in a white door above a knob, an open tool bag below. — Windham Centre

Plan ahead High security · Windham Centre

High Security Locks in Windham Centre

After the attempted break-in the police officer pointed at your door and said the strike plate was held by two short screws. Nobody got in, but you have looked at that door differently every evening since.

Call now · open 24/7(226) 641-0178

Request a visit

In plain words

Think of the upgrade as four layers working together. The cylinder resists picking, bumping and drilling. The deadbolt resists sawing and kicking with a long, hardened bolt. The strike and screws keep the frame from splitting when the door is struck. And the key control stops copies being made without your say-so. A locksmith assesses your door for each layer and tells you where it is weak, because a strong cylinder screwed into a soft frame gains you little. Most homes end up with a graded deadbolt and a patented cylinder; businesses often step up to laboratory-rated cylinders and heavier lock bodies.

Sound familiar?

After the attempted break-in the police officer pointed at your door and said the strike plate was held by two short screws. Nobody got in, but you have looked at that door differently every evening since.

How the visit goes

High Security Locks · Windham Centre

How the visit goes

Double glass doors in metal frames with a horizontal push bar, beside a brick wall, with a parking lot and trees outside. — Windham Centre
  1. 1

    The bolt, the pocket and the strike

    A deadbolt is only as good as how far it reaches and what it reaches into. The locksmith measures the throw of the bolt with the door closed, checks that it fully extends without the door being lifted or pushed, and looks at the pocket it enters in the jamb. A shallow pocket, a stamped strike plate and screws barely longer than a thumbnail are the usual finding on a builder-grade door. Then the frame is examined for splits, soft wood and gaps behind the jamb, since a kick lands on the strike, not on the cylinder.

  2. 2

    Retiring the old keys and closing gaps

    Part of the visit is making the old keys meaningless. Once the new cylinders are in, every previous key is tried to confirm it no longer operates anything, and any remaining door on the old keyway is either upgraded or at least rekeyed so an unknown copy has nowhere to go. The locksmith also closes small gaps found during the assessment: replacing hinge screws with long ones, adjusting a closer, adding a cylinder guard, or moving a thumb-turn away from glass. The door leaves the visit as one coherent assembly rather than one strong part among weak ones.

  3. 3

    A key plan that survives staff changes

    For a business, the handover includes a key schedule showing every cylinder, every key number and who holds it. When someone leaves, their key comes back and is struck off; if it does not come back, you know exactly which doors it opened and can decide whether one cylinder or several should be repinned. Because the keyway is restricted, a departed employee cannot quietly keep a copy. New hires are issued a numbered key against a signature. The plan lives in a folder or spreadsheet, and the locksmith keeps a matching record so the two can be reconciled whenever you like.

In the van

  • Box strike
  • Three-inch strike and hinge screws
  • Graded deadbolt with hardened bolt
  • Wrap-around door reinforcer
  • Key control authorisation card

What affects the quote

  1. 1

    Exit devices and closers on the same door

    Where a commercial door carries a push bar or closer, the new lock must work with them, and adjusting or replacing that hardware is part of the same visit.

  2. 2

    Strike and frame reinforcement

    A reinforced strike with long screws is modest work on a healthy frame. Deepening the pocket, filling split wood, fitting a jamb plate or a wrap-around reinforcer adds materials and time.

  3. 3

    Glass near the lock

    Sidelights or glazed panels beside the deadbolt may call for a different function or extra hardware to keep the inside turn out of reach, always keeping easy exit in view.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(226) 641-0178

High Security Locks: questions

Advice · (226) 641-0178

Is a high security cylinder really pick proof?

Nothing is beyond a laboratory with unlimited time, so the honest measure is minutes, not absolutes. Rated cylinders are tested to resist skilled picking and impressioning for a set period, and drilling and forcing for another. In the real world that matters because someone at a door has seconds, not a workbench. The sidebar and false grooves in the pins give a picker nothing reliable to feel, and the hardened inserts stop a bit, which is why these attacks move on to easier doors.

Why does the locksmith care so much about the strike plate?

Because that is where a kicked door fails. The bolt is strong, but it sits in a pocket in the jamb held by a thin plate and short screws, and a boot splits the wood around it. A reinforced strike or box strike fastened with three-inch screws into the wall framing spreads the blow along the frame. It is the least visible part of the upgrade and often the one that does the most.

Can a high security cylinder be rekeyed later?

Yes. Like any pin tumbler it can be repinned to a new combination by a locksmith who holds the system, so a departed employee's key can be retired without replacing hardware. Some lines use interchangeable cores that swap in moments with a control key, which suits businesses with frequent turnover. Rekeying stays within your registered keyway, so the key control you paid for continues after the change.

Haldimand-Norfolk, Ontario

Windham Centre information

Town
Windham Centre, Haldimand-Norfolk, Ontario
In business
22 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

62%

Older homes. About 62% of homes in Norfolk County were built in 1980 or earlier, according to the 2021 Census.

Period hardware on older homes deserves matching parts, not a mismatched modern set. A locksmith who works among such houses keeps finishes and styles that suit them, so a repaired or replaced lock still looks like it belongs to the door.

83%

Mostly houses. Single-detached houses make up about 83% of homes in Norfolk County (2021 Census).

Homeowners in houses often want a spare key that lives outside safely. A locksmith can fit a proper key safe or set up a keypad so a hidden key under a pot is no longer part of the plan.

Source: Statistics Canada, 2021 Census of Population

Open Windham Centre in Google Maps

Open 24/7

Request a visit

After the attempted break-in the police officer pointed at your door and said the strike plate was held by two short screws.

Call now · open 24/7(226) 641-0178
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 22 years in business